A-61679 May 2015 19
Adjust tab: black and white The options available on the Adjust tab depend on the Scan as
selection on the General tab. The following options are based on a
Scan as selection of Black and White.
Conversion quality — these settings effect how the scanner analyzes
a grayscale version of the document which is used to produce the black
and white electronic image.
• Best (Intelligent QC): this performs the same analysis as Best with
the additional benefit of Intelligent QC (Quality Control). For
challenging documents the grayscale version of the document is
produced, allowing you final control over image quality within your
application software.
• Best (iThresholding): the scanner analyzes each document to
determine the optimal settings to produce the highest quality image.
This option allows scanning of mixed documents with varying quality
(i.e., faint text, shaded backgrounds, color backgrounds) and when
scanning with consistent document sets.
• Normal (ATP): allows you to determine the optimal settings to
produce the desired image quality. This option works best when
scanning with consistent document sets. You may also want to use
this option if you have difficult documents such that you cannot find a
Contrast setting for Best that produces the desired quality.
• Draft (Fixed): allows you to select the grayscale threshold used to
determine if a pixel is black or white. This option works best for high
contrast documents.
To Next Page
Loading...
