5-6 A-61778 December 2013
Cleaning the flatbed glass The flatbed’s glass platen can collect fingerprints and dust. Use Staticide
Wipes for Kodak Scanners to clean the glass platen.
1. Open the flatbed cover.
2. Wipe the glass platen with a Staticide wipe.
3. Dry the glass platen with an almost dry Staticide wipe.
4. Close the flatbed cover.
IMPORTANT:Do not spray or pour cleaning liquids on the flatbed’s glass
platen, as these liquids may seep under the glass and cause
damage.
To Next Page
Loading...
