1-4 A-61778 December 2013
9 Power button — press to turn the scanner on. When you hold the power
button for longer than a few seconds the scanner will turn off.
10 Stop button — stops scanning.
11 Operator Control Panel — displays 1 - 9 and messages. These
numbers correspond to a predefined function. U or E is displayed if an
error is encountered. See Chapter 6 for more information.
In addition, one of these icons may be displayed:
12 Scanner cover release latch — pull the release latch to open the
scanner cover.
13 Output tray — collects the scanned documents.
Indicates that documents are in the input tray and the
scanner will scan from the input tray.
Indicates that no documents are in the input tray and the
scanner will scan from the flatbed, if the option to scan from
the flatbed is configured in your scanning application.
If your scanner is connected to an optional Kodak A3 Flatbed
Accessory, the flatbed within the i2900 Scanner will be
disabled. If there are documents in the input tray, the scanner
will scan from the input tray.
If no documents are in the input tray, the flatbed icon is
highlighted. The document will be scanned from the flatbed if
this option is configured in your scanning application.
To Next Page
Loading...
