●
Machinery Directive 2006/42/EC
●
EMC Directive 2014/30/EC
●
Class A product as specified in U.S. Federal Communications
Commission (FCC) Rules, part 15
●
Airborne noise emissions at a maximum of 78 dB(A)
●
Operating ambient temperature at a maximum of 30°C (86°F)
Note: The international standards listed in this guide are subject to change. To
check the latest standards that apply to your model, review the latest
Declaration
of Conformity
certificate available on your service and knowledge information
portal.
Dataplate label on the platesetter
The dataplate label displays many regulatory compliance markings and
the platesetter's serial number. The label is located at the rear of the
platesetter, near the power switch.
Figure 1: Dataplate label on the Magnus VLF platesetter
Compliance labels
The labels that show compliance with United States Federal
Communications Commission (FCC) rules and with U.S. Center for
Devices and Radiological Health (CDRH) requirements are located at
the rear of the platesetter, near the power switch.
4
Chapter 1—Introduction to safety information
To Next Page
Loading...
