from the unload table, cuts registration features into the plates,
and ejects them to the plate processing equipment or plate
stacker.
Rear hood
A hinged section of the exterior surface of the platesetter that is
relied upon as an access panel. Operators can unlock and lift
the rear hood for maintenance or error recovery.
Universal debris removal cabinet (UDRC)
An accessory that filters potentially harmful airborne emissions
released during imaging certain types of media. It is optional for
platesetters but required for Kodak Flexcel NX imagers.
Safety standards and compliance labels
The platesetter is designed, built, and tested according to
internationally recognized safety standards for reducing the risk of
death and serious injury from laser, mechanical, and electrical hazards.
The platesetter complies with the following standards:
●
Class 1 laser product as specified in U.S. Federal Regulations 21 CFR
1040.10, in accordance with the regulations of the Center for
Devices and Radiological Health (CDRH)
●
EN ISO 12100: 2010
Safety of Machinery—General Principles for
Design—Risk Assessment and Risk Reduction
●
EN ISO 13849-1: 2008
Safety of Machinery, Safety-Related Parts of
Control Systems. Part 1: General Principles for Design
●
EN 60825-1: 2014
Safety of Laser Products; Class 1 Laser Product
●
CSA 60950-1: 2007 +A1 +A2
Information Technology Equipment;
Safety; Part 1
●
UL 60950-1: 2014
Information Technology Equipment; Safety; Part 1
●
EN 60950-1: 2006 +A11 +A1 +A12 +A2
Information Technology
Equipment; Safety; Part 1: General Requirements
●
EN 60204-1: 2006 + A1
Safety of Machinery, Electrical Equipment
of Machines. Part 1: General Requirements
●
EN 55011: 2016
Industrial, Scientific and Medical Equipment -
Radio-Frequency Disturbance Characteristics - Limits and Methods
of Measurement (CISPR 11), Class A
●
EN 61000-6-1: 2007
EMC - Part 6-1: Generic Standards. Immunity
for Residential, Commercial and Light-Industrial Environments
●
Low Voltage Directive 2014/35/EC
Safety standards and compliance labels
3
To Next Page
Loading...
Need help?
General
