command. If the drum is moving when you click Unlock, the
solenoid lock normally is not released until the drum comes to a
complete standstill.
●
Rotate the power/emergency stop switch to the off position. The
solenoid lock is released as soon as the switch is rotated to the off
position and the power is disconnected. If the drum is moving when
you turn off the power, the drum normally stops revolving within 15
seconds of the lock's release. Wait 15 seconds before opening the
rear hood.
When the lock is released, you can open the rear hood. If you see any
mechanical movement when you open the hood, the device must be
repaired:
●
Keep your hands away from the moving parts.
●
Rotate the power/emergency stop switch to the off position and
secure it with a padlock.
●
Close the rear hood.
●
Contact your authorized service representative.
Rear panel
To remove the rear panel, use a flat-head screwdriver to loosen (rotate
counterclockwise) the fasteners that secure the panel to the
platesetter.
19
To Next Page
Loading...
Need help?
General
