Kodak PIXPRO AZ361

19
Resetting Date/Time
After you set your Date/Time for the rst time, follow
the instructions below to reset date and time.
1. Turn the camera on via the power switch.
2. Press the
button, press the up/down arrow but-
ton to select , and press the button to enter
the menu.
3. Press the up/down arrow button to select
, and
press the button or right arrow button to enter
the menu.
4. Press the up/down arrow button to select
「Date & Time」and press the button or right
arrow button to enter the menu.
5. Press the left/right arrow button to select the Date/
Time to be adjusted: Time is displayed in yyyy:MM:
dd HH:mm.
6. Press the up/down arrow button to press the value
for your selected block. After you nish your set-
tings, press the button to conrm.
7. Press the
button and the following snapshot
screen appears.