Kodak PIXPRO AZ361

75
3. Connect the other end of the cable to an available
USB port on your computer.
4. After the transmission is complete, disconnect the
USB cable according to the instructions specifying
how to safely remove USB devices.
Video System
Use this feature to switch the video system from
either NTSC or PAL.
1. Press the
button, press the up/down arrow but-
ton to select and press the button to enter
the menu.
2. Press up/down arrow button to select
and
press the button or right arrow button to enter
the menu.
3. Press the up/down arrow button to select
「TV-
System」and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to select
「NTSC」or「PAL」and press the button to
conrm.