Kodak PIXPRO AZ361

78
Connecting to a PictBridge Compatible Printer
PictBridge technology allows printing of
the photos saved in the memory card by
the printer.
To nd out if a printer is PictBridge
compatible, simply look for the PictBridge
logo on the packaging or check the owner's manual
for specications. With the PictBridge function on your
camera, you can print the captured photos directly
to a PictBridge compatible printer using the supplied
USB cable, without the need for a PC.
Setting the USB Mode
The camera’s USB port can be set to connect with
either a PC or a Printer, the following steps will ensure
that the camera is correctly congured to connect with
a Printer.
1. Press the
button, press the up/down arrow but-
ton to select and press the button to enter
the menu.
2. Press up/down arrow button to select
and
press the button or right arrow button to enter
the menu.
3. Press the up/down arrow button to select
「USB」
and press the button or right arrow button to
enter the menu.
4. Press the up/down arrow buttons to select
「Printer」and press the button to conrm.
After the camera is reset, it will switch to PC
mode automatically from USB mode.
See “PictBridge“ section on page 80.