LED behaviors Status messages Unit status or possible causes Refer to
and
blink as pattern 1
Cartridge/Paper
Jam:
Unplug and replug
the power cable.
An ink cartridge is not installed correctly.
–
Press and hold
(Power/Standby) longer than 3 seconds to
turn the unit Off (Standby).
Unplug the AC Plug.
Check that the Ink Cartridges have no obstacles and clear
pathways.
Connect the AC plug to the AC outlet.
A paper jam has occurred inside of the unit.
–
Firmly grasp both sides of the paper, then gently pull it out.
Press and hold
(Power/Standby) longer than 3 seconds
to turn the unit Off (Standby). Unplug the AC Plug. Wait at
least 30 seconds, then connect the AC plug back into the AC
socket.
●
If this error occurs occasionally, visit our website at
www.kodakverite.com/support for the latest
troubleshooting.
●
If you cannot solve the problem, disconnect the AC
plug and contact an Authorized Service Center.
“Clearing paper jam in
the unit” on page 52.
“Fixing a paper jam” on
page 52.
“Hard Reset” on
page 52.
blink as pattern 6
blinks as pattern 1
Remove and re-
insert black ink
cartridge.
Soiled or unsupported ink cartridge has been inserted.
–
Clean the surface of the nozzles and contacts on the Ink
cartridge with a dampened soft cloth then let them dry before
reinserting cartridge.
–
Replace the current Ink cartridge with an authorized Ink
cartridge.
●
If this error occurs occasionally, try to replace the
current Ink cartridge with a new Ink cartridge.
“Cleaning the ink
cartridge nozzles and
contacts” on page 53.
“Changing the ink
cartridge” on page 50.
blink as pattern 6
blinks as pattern1
Black ink is empty.
Black ink is empty in the ink cartridge.
–
Replace with a new Ink cartridge.
●
Order a new Ink cartridge from our website at
www.kodakverite.com
“Changing the ink
cartridge” on page 50.
blink as pattern 6
blinks as pattern 1
Black Ink Error
Black ink cartridge error.
–
Clean the surface of the nozzles and contacts on the Ink
cartridge with a dampened soft cloth then let them dry before
reinserting cartridge.
–
Replace the current Ink cartridge with an authorized Ink
cartridge.
●
If this error occurs occasionally, try to replace the
current Ink cartridge with a new Ink cartridge.
“Cleaning the ink
cartridge nozzles and
contacts” on page 53.
“Changing the ink
cartridge” on page 50.
blink as pattern 6
blinks as pattern 1
Remove and re-
insert color ink
cartridge.
Soiled or unsupported ink cartridge has been inserted.
–
Clean the surface of the nozzles and contacts on the Ink
cartridge with a dampened soft cloth then let them dry before
reinserting cartridge.
–
Replace the current Ink cartridge with an authorized Ink
cartridge.
“Cleaning the ink
cartridge nozzles and
contacts” on page 53.
“Changing the ink
cartridge” on page 50.
blink as pattern 6
blinks as pattern 1
Color ink is empty.
Color ink is empty in the ink cartridge.
–
Replace with a new Ink cartridge.
●
Order a new Ink cartridge from our website at
www.kodakverite.com
“Changing the ink
cartridge” on page 50.
blink as pattern 6
blinks as pattern 1
Color Ink Error
Color ink cartridge error.
–
Clean the surface of the nozzles and contacts on the Ink
cartridge with a dampened soft cloth then let them dry before
reinserting cartridge.
–
Replace the current Ink cartridge with an authorized Ink
cartridge.
●
If this error occurs occasionally, try to replace the
current Ink cartridge with a new Ink cartridge.
“Cleaning the ink
cartridge nozzles and
contacts” on page 53.
“Changing the ink
cartridge” on page 50.
61
English
Continued on next page.
To Next Page
Loading...
