LED behaviors Status messages Unit status or possible causes Refer to
lighting
Black ink is empty.
Black ink is empty in the ink cartridge.
–
You get good printed results with Color mode in this
condition.
●
If you want to use both Ink cartridges, please cancel
the print job then press and hold
(Power/Standby)
and replace with a new Black Ink cartridge.
－
lighting
Black ink cartridge
is not detected.
Black ink is not inserted.
–
You get good printed results with Color mode in this
condition.
●
If you want to use both Ink cartridges, please cancel
the print job then press and hold
(Power/Standby)
and replace with a new Black Ink cartridge.
－
lighting
Color ink is empty.
Color ink is empty in the ink cartridge.
–
You get good printed results with Mono mode in this
condition.
●
If you want to use both Ink cartridges, please cancel
the print job then press and hold
(Power/Standby)
and replace with a new Color Ink cartridge.
－
lighting
Color ink cartridge
is not detected.
Color ink is not inserted.
–
You get good printed results with Mono mode in this
condition.
●
If you want to use both Ink cartridges, please cancel
the print job then press and hold
(Power/Standby)
and replace with a new Color Ink cartridge.
－
blinks as pattern 1
Defective
Cartridge
Ink cartridge(s) error.
–
Clean the surface of the nozzles and contacts on the Ink
cartridges with a dampened soft cloth then let them dry
before reinserting cartridge(s).
–
Replace the current Ink cartridges with authorized Ink
cartridge(s).
●
If this error occurs occasionally, try to replace the
current Ink cartridges with new Ink cartridges.
“Cleaning the ink
cartridge nozzles and
contacts” on page 53.
“Changing the ink
cartridge” on page 50.
blinks as pattern 5
Alignment in
progress...
Alignment in progress.
–
Print jobs cannot start while running alignment.
Run the alignment or run cancel operation on the device.
－
blinks as pattern 1
Printer's ink door is
open.
Ink Door Open.
–
Close Ink Door.
－
blinks as pattern 1
Printer Memory
Full
Memory of the unit is full.
–
You cannot print with this print setting.
–
Please change the print setting and try again.(Resolution, size
or number of copies)
“ Confirming Printing
Preferences for
Windows
®
-Page
Layouts” on page 30
or “Confirming Print
Settings for Mac -
Layout” on page 32.
“ Confirming Printing
Preferences for
Windows
®
-Print
Quality” on page 30 or
“Confirming Print
Settings for Mac -
Quality & Media” on
page 33.
blinks as pattern 1
Printer Memory
Full (Recoverable)
Memory of the unit is full.
–
You cannot print the multiple copies with this print setting.
–
Please change the print setting and try again.(Resolution, Size
or Number of copies)
63
English
Continued on next page.
To Next Page
Loading...
