EasyManua.ls Logo

Kodak X-Omat 2000 - Page 9

Kodak X-Omat 2000
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Processing Solutions
7C8770 – 19JAN99 9
Figure 7 Draining the Tanks
[1] If the Processor has a Silver Recovery Unit connected, disconnect the Fixer Drain Tube at the input side of the
Silver Recovery Unit. See Figure 13 on Page 17.
[2] Lift the blue Weir from the fixer Tank.
[3] Drain the fixer solution. Check the local codes for the correct disposal procedures.
Important
Do not interchange the Weirs.
[4] When the fixer Tank is drained, install the blue Weir.
[5] Drain the developer Tank in the same way.
Weir Tank
red developer
blue fixer
beige wash
H172_0503DC
H172_0503DCA
FIXER
DEVELOPER
3 DRAINS
DEVELOPER
FIXER
WASH
WATER INLET
WEIRS
WASH

Related product manuals