TP-6398 4/07 27Section 4 Troubleshooting
Section 4 Troubleshooting
4.1 Introduction
Use the following charts to diagnose and correct
common problems. First check for simple causes such
as a dead engine starting battery, loose connections, or
an open circuit breaker. The charts include a list of
common problems, possible causes of the problem, and
recommended corrective actions.
If the procedures in this manual do not explain how to
correct the problem, contact an authorized distributor/
dealer for service. Maintain a record of repairs and
adjustments performed on the equipment. Use the
record to help describe the problem and repairs or
adjustments made to the equipment.
4.2 Fault Codes
The Digital Control displays fault codes to aid in
troubleshooting. Fault codes, descriptions, and
recommended actions are listed in Figure 2-3.
Identify and correct the cause of the fault condition.
Then reset the controller after a fault shutdown. See
Section 2.4.3.
To Next Page
Loading...
Need help?
General
