TP-6805 8/15 47Section 4 Controller
SiteTech Group Notes [
Default
Setting
Adjustment
Range *
UnitsParameter
Digital Output B2
Digital Output B2 Value Read Only False
PIM
Digital Output B2 Event See dropdown list in
SiteTech.
]
Common
Fault
Digital Output B3
Digital Output B3 Value Read Only False
PIM
Digital Output B3 Event See dropdown list in
SiteTech.
]
Low
Battery
Voltage
Warning
Digital Output B4
Digital Output B4 Value Read Only False
PIM
Digital Output B4 Event See dropdown list in
SiteTech.
]
Not In
Auto
Warning
Digital Output B5
Digital Output B5 Value Read Only False
PIM
Digital Output B5 Event See dropdown list in
SiteTech.
]
Engine
Cool
Down
Active
Digital Output B6
Digital Output B6 Value Read Only False
PIM
Digital Output B6 Event See dropdown list in
SiteTech.
]
Normal
Source
Failure
Digital Output B7
Digital Output B7 Value Read Only False
Load
Mgmt
w
Digital Output B7 Event Read Only 65004
Digital Output B8
Digital Output B8 Value Read Only False
Digital Output B8 Event Read Only 65007
Digital Output B9
Digital Output B9 Value Read Only False
Digital Output B9 Event Read Only 65003
Digital Output B10
Digital Output B10 Value Read Only False
Digital Output B10 Event Read Only 65005
Digital Output B11
Digital Output B11 Value Read Only False
Digital Output B11 Event Read Only 65006
Digital Output B12
Digital Output B12 Value Read Only False
Digital Output B12 Event Read Only 65008
ATS Metering Summary
ATS Contactor Position Read Only N/A
RXT
ATS Sources Available Read Only N/A
Source 1 Metering
Source 1 Rotation Actual Read Only N/A
RXT
Source 1 Voltage L1-L2 V Read Only N/A
Source 1 Voltage L2-L3 V Read Only N/A
Source 1 Voltage L3-L1 V Read Only N/A
Source 1 Voltage Average Line
To Line
V Read Only N/A
Source 1 Frequency Hz Read Only N/A
Source 2 Metering
Source 2 Rotation Actual Read Only N/A
RXT
Source 2 Voltage L1-L2 V Read Only N/A
Source 2 Voltage L2-L3 V Read Only N/A
Source 2 Voltage L3-L1 V Read Only N/A
Source 2 Voltage Average Line
To Line
V Read Only N/A
Source 2 Frequency Hz Read Only N/A
* Read Only = Not adjustable
[ Notes indicate applicability to genset model and accessories. N/A = Not applicable to these generator s ets.
] See TT-1584 for more information about digital inputs and outputs.
w Load management device (LCM, load shed kit, or RXT with combined interface/ load management board)