7. General Settings
NOTE: Interface settings can be configured from the interface. Valve
setup and other system settings must be configured from the
controller Web pages.
From the Interface
On the [home] menu, touch the [settings] icon.
Go to [interface] to select general settings for the interface.
For more information about using the interface and its menus,
refer to the online guide on the product page at
www.us.kohler.com.
From the Web Pages
On a computer or tablet connected to the same router as the
controller, open a browser and enter the Web IP address. Refer to
the ″Obtain the IP Address″ section of this guide.
Click on the [Settings] tab, then on [System].
Select the general settings for your system.
User presets and additional interface settings can be configured
from the Web pages. Click on the appropriate menu to access the
options for those settings.
For valve setup, refer to the ″Valve Settings″ section of this guide.
Interface Web Page
interface
settings
Available Shower Configurations
Date/Time
Date Format
display
auto return
start up
Custom
2014/1/20 12:40 P -0600
Day Light Savings Time
MM-DD-YYYY
DD-MM-YYYY
YYYY-MM-DD
Control Settings Service
System
Users Interface Valve 1
1218131-2-A 12 Kohler Co.
To Next Page
Loading...
Need help?
General
