Cleaning the Screens
Sprayhead Screen
Turn the handle to the closed position.
Disconnect the nut at the end of the spray hose.
Remove and clean the screen inside the spray hose.
Reinsert the screen and reconnect the spray head.
Valve Box Inlet Screen
Turn the handle to the closed position.
Disconnect the outlet hose from the valve box.
Remove and clean the inlet screen from inside the valve box.
Reinstall the inlet screen and reconnect the outlet hose.
Troubleshooting
CAUTION: Risk of product damage. This product contains
sensitive electronic components. Use care not to damage pins and
connectors during troubleshooting.
NOTE: For service parts information, visit your product page at
www.kohler.com.
Screen
Spray
Head
Screen
Outlet Hose
Spray
Hose
Valve Box
Nut
1281441-2-C 14 Kohler Co.
To Next Page
Loading...
Need help?
General
