Kohler KD440

14
174
175
- 71 -
STORAGE
-Removeallprotectionsandcoverings.
- Remove the protective oil from the outside of the engine using
suitableproducts(solventordegreaser).
-Removetheinjectorand,usingaask,pourengineoilonthepiston
crown(nomorethan2cc).
-Removerockerarmcoverandsprayengineoilonthevalves,then
turnthecrankshaftmanuallyafewrevolutions.
-Starttheengineandallowittoheatupforabout10minutes.
-Removethedrainplugandlettheprotectiveoilowoutcompletely.
-Replacethedrainplug.
- Fill up with engine oil as far as the upper level of the dipstick
using the oil recommended by the manufacturer for normal engine
operation.
PROCEDURES TO BE CARRIED OUT BEFORE START THE ENGINE
KD 225_315_350_400_440 Workshop Manual_cod. ED0053029330_1° ed_ rev.00