To Next PageTo Next PageWhy is there low or no faucet flow in my Kohler Water Filtration System?
Low or no faucet flow in your Kohler Water Filtration System can be caused by a filter blockage due to poor water quality. Check and replace the filter. Alternatively, if the Inlet TDS LED indicator shows a waterfall effect, the system is flushing. Turn off the faucet and wait for the flush to finish.
What to do if my Kohler REVE Water Filtration Systems filter LEDs change to orange with beeps?
If the filter LEDs on your Kohler Water Filtration System change to orange and you hear beeps, it means the filter life is running low or is out. Replace the filter element to resolve this issue.
What to do if my Kohler Water Filtration unit fails to initiate?
If your Kohler Water Filtration unit fails to initiate, first ensure it is properly plugged into a power supply. If it's still not working, there may be a power adapter failure.
How to fix Err001 error in Kohler Water Filtration Systems?
The Err001 error in Kohler Water Filtration Systems can be caused by several issues. First, check all fittings for tightness, ensuring the tubing is fully seated. If the tubing is abraded in the seal area, recut the tubing and redo the connection. After these steps, unplug the power, wipe and dry the water leakage protector sensor, and plug the power in again.
What to do if my Kohler Water Filtration System shows Err009?
If your Kohler Water Filtration System displays Err009, check all fittings for tiny leakages. It may also be due to a change in line pressure; wait for the water pressure to return to normal. Also, check whether the filtration faucet is closed tightly.
How to fix Err006 error on Kohler REVE Water Filtration Systems?
To address the Err006 error on your Kohler Water Filtration Systems, repeat the unplugging and plugging in of the unit once.
What does Err005 mean on my Kohler Water Filtration System?
The Err005 error on your Kohler Water Filtration System indicates a change in line pressure.
General| Brand | Kohler |
|---|---|
| Model | REVE Series |
| Category | Water Filtration Systems |
| Language | English |
Guide for installing the water filtration faucet on the sink.
Instructions for connecting tubing to the system and plumbing.
Procedure for installing and replacing filter cartridges and resetting indicators.
Steps for initial system power-on, self-inspection, and rinsing.
Explanation of the unit's display screen elements and indicators.
Information on filter life indicators and alerts for replacement.
How to check the remaining life of filter cartridges.
How the system indicates and handles faults or alarms.
Details on the system's automatic rinsing cycles.
Key notes and advice for proper system operation and maintenance.
