To Next PageTo Next Page
Need help?Do you have a question about the Kold-Draft GT364AC and is the answer not in the manual?
Explains hazard symbols, signal words, and warnings for safe operation.
Requirements before installing the ice machine, including ambient temp, dimensions, plumbing, and electrical.
Details voltage tolerances, breaker/fuse ratings, and circuit ampacity.
Step-by-step guide for assembling the ice machine and bin.
Steps for powering up and starting the ice machine for the first time.
Recommended procedure for cleaning and sanitizing the ice machine.
Details the controller's status indicators, input, and fault codes.
Lists specific fault codes, their causes, and troubleshooting steps.
Explains stacked jumpers, programming port, and temperature adjustments.
Table outlining the ice making process steps, inputs, and outputs.
Status of controls during ice bin full and cleaning modes.
Wiring diagrams for GT36x, GT56x, and GB56x models.
Wiring diagram for GB1064A and GB1064L models.
Wiring diagram for GB106xR remote condenser models.
Procedure to test for ground faults in the compressor.
Procedure to test compressor winding continuity and resistance.
Step-by-step instructions for removing and replacing the water plate.
Electrical tests for the actuator motor and related components.
Troubleshooting steps for when the ice machine is not operating.
Troubleshooting for compressor issues when other components work.
Safety precautions specific to ice crushers.
Steps for cleaning the ice crusher, including safety warnings.
Detailed wiring diagram for T271/T274 series ice crushers.
Guidelines for calculating the correct refrigerant charge for the system.
General| Brand | Kold-Draft |
|---|---|
| Model | GT364AC |
| Category | Ice Maker |
| Language | English |
