To Next PageTo Next Page
Need help?Do you have a question about the Kold-Draft GB564LC and is the answer not in the manual?
Defines hazard symbols and lists important safety precautions for operation.
Requirements before installing the ice machine.
Step-by-step guide for assembling the ice maker and bin.
Descriptions of the main mechanical parts of the ice machine.
Describes input sensor status and the machine's fault code system.
Troubleshooting for evaporator temperature fault code.
Troubleshooting for water plate closure fault code.
Troubleshooting for freeze time fault code.
Troubleshooting for short freeze cycle fault code.
Troubleshooting for harvest cycle duration fault code.
Troubleshooting for water fill time fault code.
Describes the steps in the ice making cycle.
Procedure to test for short circuits to ground.
Procedure to test winding continuity and resistance.
Tests for potential relay, run capacitor, and start capacitor.
Troubleshooting steps when the ice machine is not running.
Troubleshooting steps when the compressor is not operating.
Safety precautions specific to ice crushers.
Installation guidelines for the ice crusher unit.
Steps for assembling and installing the ice crusher.
How to operate the ice crusher, including settings.
Steps for cleaning the ice crusher.
Instructions for installing the remote air-cooled condenser.
Technical specifications for the remote condenser models.
Guidance on calculating the required refrigerant charge.
General| Type | Ice Maker |
|---|---|
| Condenser Type | Air-Cooled |
| Refrigerant | R-404A |
| Voltage | 115V |
| Ice Type | Cube |
| Power Supply | 115V/60Hz |
| Water Supply | Potable water supply required |
