To Next PageTo Next Page
Need help?Do you have a question about the Kold-Draft GT36 Series and is the answer not in the manual?
General| Model | GT36 Series |
|---|---|
| Type | Ice Maker |
| Weight | Varies by model |
| Condenser Type | Air-Cooled, Water-Cooled |
| Refrigerant | R404A |
Locates the serial number plate for machine identification.
Provides a key to decode the date code on the serial number plate.
Explains the structure and meaning of Kold-Draft model numbers.
Outlines essential checks and requirements before installing the ice machine.
Step-by-step guide for assembling the ice machine and bin.
Lists error codes, their causes, and troubleshooting actions.
Evaporator temperature exceeds 120F, causing shutdown.
Water plate failed to close after three consecutive attempts.
Freeze time exceeds 60 minutes or 45 minutes three consecutive times.
Freeze time less than 5 min. for 3 consecutive times.
Harvest cycle exceeds 20 minutes.
Electrical schematics for GT36x, GT56x, and GB56x ice maker models.
Electrical schematics for GB1064A and GB1064L models.
Electrical schematics for the GB106XR model.
Steps to check the compressor for ground faults and test winding resistance.
Ice machine or compressor not operating.
Safety precautions specific to the operation of ice crushers.
Instructions for installing the ice crusher unit.
Steps for cleaning the ice crusher unit.
Detailed instructions for installing the remote air-cooled condenser.
