3
Window Kit Installation Instructions
Preparations for Installing the Window Kit
You must vent your portable air conditioner when running it in cooling mode. Your unit includes a
window exhaust kit that can be used to vent the unit out of a window.
Before you begin, make sure that you have all the parts necessary for installation and that a
suitable location is picked.
Window Kit Parts list:
Adjustable Window
Slider Kit (with bolt)
Foam Seal – (Adhesive)
- two (2) short pieces
- two (2) long pieces
Foam Seal
(Non-Adhesive)
- one (1) long piece
Remote Control with
Batteries
Security Bracket with two
(2) screws
If you have multiple windows, choose one that is near an electrical outlet that will be able to
provide sufficient power to your unit. See the power requirements listed on the product label
printed on the side, or on the back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding window as shown in the
following images and instructions. Follow the instructions for your desired window kit installation.
Note: You may need to contact your electrician if your room’s circuit is not able to power your
unit.
To Next Page
Loading...
Need help?
General
