Koldfront WAC25001W Service Manual

23
6.4 Fan-Only Mode
 If the temperature can’t be controlled by the selected mode and the room ambient temperature is
shown on the display the unit will default to fan only mode.
 The readout can only display a temperature of 32 to 99 ℉ (0 to 37℃.) lf the temperature is out of that
range the display will show LO or HI.
 The Timer function works in fan-only mode.
 The follow me function (on some models) does not work in fan-only mode.
6.5 Cooling Mode
 The cooling temperature can be set from 62 to 86℉ (17 to 30℃.)
 Sleep, Timer and Energy Saver functions work in cooling mode.
 The compressor will run when the difference between the set temperature and the actual ambient
room temperature conforms to the chart below:
 When TA≤TS (for 1 minute) the compressor turns off.
 When T1>TS+2℉ the compressor turns on.
(TA-Ts)℉
+2
0
Operation conditon
compressor off with a delay of 1 minute
compressor on

Koldfront WAC25001W Specifications

General

Description of product	Window Air Conditioner and Heater
Model	WAC25001W
Color	White
Voltage/Frequency	208-230V / 60Hz
Current (Cooling / Heating)	11.3 / 22.5A
BTUs (Cooling / Heating)	25, 000 / 16, 000
Coolant	R410A, 36.7 oz.
Timer	24 Hour

Weight and Dimensions

Dimensions W x D x H	26.5” x 26.5” x 18.6”
Weight	131 lbs.