INTRODUCTION 1.2 DIVISION OF THE BINDER
5
1.2 DIVISION OF THE BINDER
Part 1:
Operation Manual
Part 2:
Lubrication- and Maintenance Manual
Part 3:
Depending on the volume of Part 3 a second Binder "Volume 2" is
being delivered with the Shovel. This Binder contains the General
Assembly Procedure Manual for the Shovel, Specification Book-
let, Service Literature for the Power Unit (Diesel Engine or Elec-
tric Motor) and for Special Equipment. The Electrical- and
Hydraulic Diagrams are attached in the pocket of the front cover.
Refer to the "TABLE OF CONTENTS VOLUME 2 BINDER"
for details.
Read the Manuals before You Start the Engines.
Before operating the machine, familiarize yourself with its instru-
ments and controls.
Observe the instructions in these manuals for:
● your Personal SAFETY
● Operating SAFETY, and
● READY and EFFICIENT PERFORMANCE of your
KOMATSU Hydraulic Mining Shovel.
Periodic preventive inspections and maintenance are the surest
means of keeping the machine in proper working order. Prompt
detection and correction of minor irregularities, and immediate
replacement of worn out or broken parts will prevent failures and
avoid expenses.
Replace damaged graphics and symbols.
Observe safety precautions to prevent injury and damage.
If you have any questions concerning this literature please con-
tact
Komatsu Mining Germany GmbH
Service Information
Department 8151.40
P.O. Box 18 03 61
D - 40570 Düsseldorf
GERMANY
To Next Page
Loading...
