OPERATION 3.4 ELECTRONIC TEXT MONITORING SYSTEM ETM
97
OTICE
The steps for operating the ETM keyboard are indicated by
the key symbols.
Call up the Basic Display from any message
If a fault condition occurs (e.g. message 21) it is possible to call
up the basic display for information of current time or engine
speed.
Example: Message 21
The grease consumption can be determined, when the operating
hours at the time of the last refilling or replacement of the grease
barrel have been recorded.
On the screen appears the basic display, e.g.:
Message 0 will only be displayed for a few seconds, then the dis-
play returns to the current message.
$h: 5200:27 Central lubrication system:
grease barrel empty
Page 21 displayed
4
PAGE NO
Press, until page 0 appears
2
UP
Press, to display message 0 (basic display)
1
MESSAGE
15.07.07 14 : 36: 39 h: 5200:27
1/min: 1800
To Next Page