OPERATION OPERATION
3-75
OPERATION AND CHECK BEFORE STARTING ENGINE 3
WARNING
When starting the engine, check that the parking lever and safety lock lever are placed securely at the
LOCK position. If the work equipment control lever is touched by accident when the engine is started, the
work equipment may move unexpectedly and cause serious injury or damage.
1. Check that parking lever (1) is in the LOCK position.
REMARK
If this parking lever is not in the LOCK position, the engine will
not start.
2. Check that joystick (2) is in the N (neutral) position.
REMARK
The engine cannot be started if joystick (2) is not in the N posi-
tion.
If joystick (2) is in F or R, the letter P on display panel A will
flash.
Free
Lock
Reverse
Foward
To Next Page
Loading...
