Need help?Do you have a question about the Komax M1630 Jet and is the answer not in the manual?
Describes the intended application of the M1630 Jet and M1630 Jet eco printers for coding and marking.
Identifies operators of the equipment and recommends product training before operation.
Defines the meaning of WARNING, CAUTION, and NOTE indicators used in the manual.
Illustrates and explains common safety symbols indicating hazards and precautions.
Outlines fundamental safety and handling requirements for inks, make-up, and wash fluids.
Provides guidelines on immediate actions and precautions after exposure to printer chemicals.
Details safe storage practices for printing inks and make-up fluids.
Addresses fire hazards associated with printing inks and necessary precautions.
Procedures and warnings for handling ink and make-up spillages safely and correctly.
Specifies ventilation requirements for safe operation with solvent-based inks.
Addresses risks of flammable vapour and static discharge during printer operation.
Step-by-step guide to power on the M1630 Jet printer.
Step-by-step guide to safely power off the M1630 Jet printer.
Instructions on how to start and stop the printer's ink jet function.
Describes the mode optimized for integration with Komax wire processing machines.
Details the mode for using the printer independently without machine integration.
Guides on selecting the correct wire processing machine model for integration.
Steps to log in to the printer using operator or supervisor credentials.
Instructions on how to securely log out from the printer interface.
Step-by-step guide to creating a new custom label.
Instructions on saving label designs for future use.
Procedure to locate and retrieve previously saved labels.
Guide on modifying individual elements within a label design.
Instructions for adjusting the layout and arrangement of label elements.
Steps to modify the settings and properties of a label.
Procedure for printing a created or selected label.
Explanation of the label creator interface elements and their functions.
Step-by-step guide for replacing ink and make-up cartridges.
Procedure for replacing the Intelligent Ink System (ITM) module.
Instructions for resolving blocked nozzles using the unblocking wizard.
Guide for cleaning the i-Pulse print head for the M1630 Jet eco.
Guide for cleaning the i-Pulse RS print head for the M1630 Jet.
Procedure for preparing the printer for extended periods of non-operation.
Essential safety warnings and requirements for installing the printer.
Guidelines for selecting an appropriate location and mounting the printer cabinet.
Information on safe and correct electrical connections for the printer.
Specific environmental conditions for optimal printer placement.
Details on mounting the printer to minimize vibration and ensure stability.
Instructions for connecting the printer to the power supply.
Instructions and specifications for mounting the printer's touchscreen display.
Procedure for initial preparation of the i-Pulse RS print head.
Procedure for initial preparation of the i-Pulse print head for the eco model.
Instructions for installing the Intelligent Ink System (ITM) module.
Procedure for installing ink and make-up cartridges into the printer.
Guide to priming the ink system before the printer's first use.
Specifies the temperature ranges for printer operation and storage.
Details humidity limits and intended environment for the printer.
Information on the printer's electrical supply, voltage, and power consumption.
Specifies the Ingress Protection (IP) ratings for the printer cabinet and touchscreens.
Provides the physical dimensions and weight of the printer unit.
Warnings regarding battery handling, storage, and disposal according to regulations.
To Next Page
General