I) Makesurethatthedevicehasbeensuppliedcomplete,initsoriginalpackaging
and with the manufacturer’s information. It is compulsory for dealers selling
productsincountriesotherthantheoriginaldestinationtocheckandsupplythe
translationofthisinformation.
L)All our equipment is tested/inspected piece by piece in accordance with the
procedures of the Quality Systemcertied according to theUNI EN ISO 9001
standard.Ourpersonalprotectiveequipmentiscertiedbytheaccreditedauthority
indicatedintheequipment’sspecicinstructionsand,iftheybelongtocategory
III,arealsosubjectedtoproductionsurveillance-incompliancewitharticle11/B
ofDirective89/686/CEEorwithannexVandVIIIofregulation2016/425-byan
authoritywhoseaccreditationnumberisindicatedontheequipment.
Warning: laboratory tests, inspections, information and norms do not
always manage to reproduce what actually happens in practice, and so
performance under real usage conditions in a natural environment can
differ, sometimes even considerably. The best information can be gained
by continual practice under the supervision of skilled, expert, qualied
individuals.
2 – WORKS AT A HEIGHT
Additionalinformationforprotectiveequipmentagainstfallsfromaheight.
Forthesakeofsafetyincaseofriskoffallsfromaheight,itisessentialto:
- assesstherisksandmakesurethatthewholesystem,wherethisdeviceisonlya
component,isreliableandsafe,
- prepare a rescue plan to deal with any emergencies possibly arising while the
deviceisbeingused,
- makesurethattheanchoringdeviceortheanchoringpointisalwayspositionedas
highupaspossible,andthatworkisdoneinsuchwayastoreducepotentialfalls
andrelevantheightstoaminimum,
- makesurethatthedevicesusedaresuitableforthepurposeandarecertied.
Important:inasystemforprotectionagainstfallingfromheights,itisobligatorytouse
acompleteharnessincompliancewithcurrentregulations.
3 – MAINTENANCE AND STORAGE
Devicemaintenanceconsistsof:
- Frequent washing in warm drinking water (30°C), possibly with the addition of
neutraldetergent.Rinseand,withoutspinning,leaveittodrywithoutleavingitin
thedirectsunlight.
- Lubricate moving parts (only for metal devices) with silicon-based oil. This
operationistobeperformedoncethedevicehasdriedout,beingcarefultoavoid
contactwithtextilecomponents.
Inaddition,ifnecessary:
- disinfect the device, soaking it in warm water containing 1% of sodium
hypochlorite(bleach).Rinsewithdrinkingwaterand,withoutspinning,leaveitto
drywithoutleavingitinthedirectsunlight.Avoidsterilisingtextiledevicesinan
autoclave.
Storage:store thedevicesin adry (40-90%relativehumidity), fresh(temperature
5-30°C) and dark place, chemically neutral (absolutely avoid salty and/or acid
environments), away from sharp edges, corrosive substances or other possible
detrimentalconditions.
4 – CHECKS AND INSPECTIONS
Wewouldstronglyadvisehavingchecksbeforeandafteruse,carriedoutbyqualied
CS
DA
DE
EL
EN
ES
FI
FR
IT
NL
PT
RU
SV