individuals,asindicatedintheinstructionsforthespecicequipment.Exceptinthe
case of more stringent legal requirements, inspections on category III equipment
mustbecarriedoutbyacompetentperson-thereforeonetrainedandauthorisedby
themanufacturer-everyyearstartingfromrstuse.Theoutcomeoftheseperiodic
inspectionsmustberecordedontheequipment’sinspectionchartorinadesignated
register.
5 – DEVICE LIFE
Lifetimeofmetallicequipmentisindenable,theoreticallyunlimited,whilethosein
textile,syntheticorplasticis10yearsfromthedateofproduction,underthefollowing
conditions:
- Theoperatingprocedurescomplywithpoint1C
- Maintenanceandstoragearecarriedoutasdescribedinpoint3.
- Theoutcomesofpre-andpost-usechecksandroutineinspectionsarepositive.
- Theequipmentisusedcorrectly,notexceeding¼ofthemarkedload.
Anyequipmentthatdonotpassthepre-use,post-useandperiodicinspectionsmust
bediscarded.
6 – LEGAL OBLIGATIONS
Professionalandrecreationalactivitiesareoftenregulatedbyspecicnationallaws
that may impose specic limits and/ or requirements for the use of PPE and the
preparation of safety systems, which included the PPE in their components. The
userisobligedtoknowandapply these laws, which may in some cases impose
obligationsdifferentfromthosecontainedinthisinformation.
7 – GUARANTEE
The manufacturer guarantees that the device complies with regulations in force
at the time of production. The guarantee covering faults is limited to production
defectsand raw materials. Itdoesnotinclude wear andtear,oxidation,damages
causedbyimproperuseand/orduringcompetition,incorrectmaintenance,transport,
conservation,storage,etc.Theguaranteebecomesvoidassoonasthedeviceis
modiedor tampered with.Thevaliditycorresponds to the legal guaranteeofthe
countrywherethedevicewassoldbythemanufacturer,witheffectfromthedateof
sale.Afterthisperiodnoclaimcanbemadeagainstthemanufacturer.Anyrequest
forrepair orreplacement underthiswarranty mustbeaccompanied byaproofof
purchase.Ifthedefectisaccepted,themanufacturer,atitssolediscretion,willrepair,
replace or refund the device. Under no circumstances does the manufacturer’s
liabilityextendbeyondtheinvoicepriceofthedevice.
8 – SPECIFIC INFORMATION
MOUSE WORK(g.1) isacategory IIpersonalprotective equipmentcomplying
with the requirements set forth in standard EN 397:2012+A1:2012, and mainly
designedtoprotecttheuserfromfallingobjectsandbraininjuriesorskullfractures
thatmightresult.Itisalsosuitabletobeusedat“verylowtemperatures”,downto
-30°C.
Important:
- Thehelmetisdesignedtoabsorbtheenergyofashockthroughthedestruction
orpartialdamageoftheshelland/orwebbings:replacethehelmetevenifthe
damageisnotvisible.
- Do not modify your helmet and do not apply coatings, adhesives or solvents
differentthanthosesuppliedbythemanufacturer,
- Alwaysuseoriginalaccessoriesandalwaysapplythemasrecommendedbythe
manufacturer.
CS
DA
DE
EL
EN
ES
FI
FR
IT
NL
PT
RU
SV