Konica Minolta AccurioPrint C2060L Troubleshooting Guide

Name: Konica Minolta AccurioPrint C2060L
Brand: Konica Minolta
Rating: 5 (1 reviews)

222 pages

To Next Page

To Previous Page

KONICA MINOLTA Confidential

- 5 -

1.1.2. Color Spots due to soilage inside machine

(1) Symptom

After pulling out the process mount and re-install it, color spots appear at the leading edge on

the first ten prints.

(2) Cause

While pulling out the process mount, developer and toner coming out from the toner entrance

and toner exit of the developing unit. It drops on the paper path, attaching to the paper and

resulting in the color spots.

Toner supply opening

Toner exit

Troubleshooting Guide1
Table of Contents2
Cyclic White Spot/Black Spot5
Color Spots Due to Soilage Inside Machine6
Color Spots (Black Spots)10
White Spot Due to the Developing Leakage (Foreign Material)12
White Lines (to Sub-Scan Direction)17
Gloss Line Caused by Fusing Paper Exit Roller19
Line Like Ripple on Image23
Waste Toner Packin24
Lines or Banding to the Main Scan Direction (CD) Due to Speed Difference between 2Nd Transfer and Fusing26
Image Got Blurred Affected by Ozone (Cyclic White Band)28
Photoconductor (Drum) Memory29
Developing Screw Mark31
Lines or Banding on Image Due to Speed Change (Shock Noise)34
Developing Roller (44Mm) Cycle Banding (Different Density)43
Irregular Darker or Lighter Density Band Appears after Leaving Machine under High Humidity Environment44
Jittering Lines at Trailing Edge45
MM Interval FD Lines46
Density Change by Static Electricity47
FD Lines and Banding49
MM Cycle Density Difference Caused by the Fusing Unit52
Color Lines in CD at 13Mm from the Leading Edge53
White Line Due to Separation Claw Mark55
Gloss Band in CD with Margin Width56
Image Lacks at the Corner of the Trailing Edge (Soilage in Main Scan Direction (CD)58
Darker at the Trailing Edge of Image61
Background or Toner Scattering after Continuous Low Coverage62
How to Maintain Consistent Color During Continuous Printing63
Unexpected Density Drop if "Dens. Adj. Per Paper" Set Positive (+) Value65
Small Blank Area or Color Registration Error67
Too High Gloss69
Rough Image on the 1St Side of Duplex71
White or Color Banding at Thick Paper Leading and Trailing Edges72
C-2451, C-2452, C-2453 or C-2454, Low Toner Density74
Poor Transfer at Image Front75
Prevention of the Backside Soilage77
Fainted Outline, Darker at Edge78
Backside Image Soilage80
Toner Is Not Cleaned at the Edge of the Transfer Belt82
Gloss Memory96
Center of Line Gets Broken97
Secondary Color Text Scatters98
Image Offset Caused by Fusing Unit100
Toner Band Control Setting106
On the 2Nd Side of the Small Size Thick Paper (Ex. Postcard), Uneven Color Occurs109
Setting for OHP Sheet Printing116
Trailing Edge Skews117
Printed Paper Curls (Without RU Connection)118
Fusing Wrapping Jam120
No Feed Jam (J-1101/J-1201)123
Dents on Paper at 48Mm Cycle in FD126
Centering Error (±5 MM or More)128
Paper Stick with each Other Due to Static Electricity131
Static Sticking in Options135
Paper Removing Procedure on Fusing Wrap up JAM138
Paper Wrinkle at Duplex Printing144
J-3201 Paper Is Caught by the Fusing Separation Claw145
Corner Folding at the Paper Leading Edge, Machine Front Side146
Leading Edge Does Not Looks Nice (Hitting Mark Like Peeling)148
SRA4S Corner Folding at the Paper Trailing Edge, Machine Rear Side149
Pickup Jam Clearance Workflow150
Highlight Automatic Adjustment Does Not Complete Normally after Trying Several Times176
Print Job Is Not Accepted While Machine Indicates Dehumidifying177
C-3102 ADU Wiring Connector Is Disconnected179
C-2455,C-2456､C-2457,C-2458 Toner Density Abnormality (High Density) Occur182
How to Eject Developer184
Image Shift186
Note for the Developing Shutter Installation Work188
Productivity Decrease at First in the Morning under Low Temperature, Low Humidity190
Release of Productivity down Mode for Small Size Print under High Temperature191
ADU MT Lever Is very Hard to Release193
Multi-Feed of Plain Fine Paper under High Temperature and High Humidity195
PF-707 Paper Skew of Small Size198
PF-707 Corner Fold (Dog Ear) and Conveyance JAM of Small Size201
LU-202M/Lu-202XL J-1501(no Feed Jam) Occurs When the Thick Paper and the Coated Paper Is Fed206
LU-202M/Lu-202XL J-1502(no Feed JAM) Occur When Feeding Coated Paper207
LU-202XL Black Line at 104Mm, 208Mm from Leading Edge 614Mm from Trailing Edge or Narrow Trailing Space (Magnification Defect)208
J-7229 the Paper Trailing Edge Does Not Go out the Paper Exit Section209
Irregular Correspondence of the Main Tray Exit210

Brand	Konica Minolta
Model	AccurioPrint C2060L
Category	Printer
Language	English

Konica Minolta AccurioPrint C2060L Troubleshooting Guide

Table of Contents

Other manuals for Konica Minolta AccurioPrint C2060L

Questions and Answers:

Konica Minolta AccurioPrint C2060L Specifications

Related product manuals