Konica Minolta AccurioPrint C2060L User Manual

6.2 Image Quality Adjustment
6
AccurioPress C2070series 6-40
12 Click [Apply & Close].
The calibrated measurement values are applied.
6.2.6 Specifying the reference image quality (Image Controller IC-603)
To stabilize the image quality of this machine, specify the reference values (targets) of the entire printing sys-
tem in advance.
If you change the setting value in [Custom Screen], hue variations may be drastically changed. If you change
the screen, specify the standard image quality following the procedure to avoid hue variations.
Tips
- If the image quality has not been appropriately adjusted only through daily calibration, you may improve
the situation by carrying out the following tasks.
Carry out the adjustment continuously in sequence. If you have interrupted the adjustment, select "Step 2.
Gamma Automatic Adj." each time before restarting calibration. For example, if the adjustment is interrupted
at the end of "Step 3. Density Balance Adjustment", execute "Step 2. Gamma Automatic Adj." at the time of
restart, then execute "Step 4. Calibration (without Relay Unit RU-509)" or "Step 4. Color Density Control
(with Relay Unit RU-509 installed)" in sequence.
If sufficient adjustment results are not obtained via daily maintenance, also carry out the adjustment in this
order.
For details about the setting procedure, refer to the [HTML User's Guide].
Order [Menu item] [Description]
Without Relay
Unit RU-509
With Relay Unit
RU-509
STEP1 Screen Pattern (Refer to the [HTML User's
Guide].)
Select the screen to be used with the screen
setting (assignment) changed.
STEP2 Gamma Automatic Adj. (Refer to the
[HTML User's Guide].)
Automatically adjusts the color reproducibility
of all the output paper.
STEP3 Density Balance Adjustment (Refer to the
[HTML User's Guide].)
Automatically corrects the density balance.
STEP4 Calibration
(page 6-37)
[Color Density Con-
trol] (page 6-32)
Calibration:
Calibrates the color reproducibility that fluctu-
ates from day to day.
[Color Density Control]:
Select [Basic Setting], then set [Periodical Adj.
Execution] to [ON]. If necessary, execute
[Color Density Manual Control].
STEP5 Color Balance Adjustment (Refer to the
[HTML User's Guide].)
Execute Exact Color or the G7 calibration to
enhance the color balance reproducibility.

Konica Minolta AccurioPrint C2060L Specifications

General

Brand	Konica Minolta
Model	AccurioPrint C2060L
Category	Printer
Language	English