7.3 If the Specified Paper is not Found
7
AccurioPress C2070series 7-12
7.3 If the Specified Paper is not Found
If the specified paper is not loaded into a tray at the time of printing, the message [Please load designated
xxx paper / To check details, touch [Confirm Details]] is displayed on the screen.
To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded
paper of a different size.
If you use Image Controller IC-417 / Image Controller IC-313 and enable [Job Mismatch], [Confirm Details]
may not be displayed on the touch panel. In this case, see page 7-15.
Replacing with the specified paper
1 Press [Confirm Details] on the [MACHINE]
screen.
2 Select a tray to replace paper into, then press
[Change Setting].
3 Check the setting of the paper to be changed.
To Next Page
Loading...
Need help?
General
