Konica Minolta bizhub 185 User Manual

bizhub 185 9-9
9.3 [UTILITY]
9
9.3.3 [CUSTOM SIZE MEMORY]
Frequently used custom sizes can be registered and recalled when needed.
Up to two custom sizes can be registered.
% Press the Menu/Select key ö [UTILITY] ö [CUSTOM SIZE MEMORY].
9.3.4 [USER MANAGEMENT]
When the room temperature changes drastically (such as when a heater is used in the winter) or when the
machine is used in an extremely humid location, condensation may form on the surface of the Drum inside
the machine, resulting in decreased print quality.
Use this function to dry the Drum and eliminate the condensation.
0 The machine completes the Drum Dehumidify within about one minute.
% Press the Menu/Select key ö [UTILITY] ö [USER MANAGEMENT].
Settings
[MEMORY1] Register custom paper sizes.
The paper length [X] can be set between 140 mm and 432 mm.
The paper width [Y] can be set between 90 mm and 297 mm.
[MEMORY2]
Factory default
[MEMORY1] [X]: 140 mm, [Y]: 90 mm
[MEMORY2] [X]: 140 mm, [Y]: 90 mm
CUSTOM SIZE MEMORY
MEMORY1
MEMORY2
RETURN
Settings
[DRUM DEHUMIDIFY] Start the Drum Dehumidify.
USER MANAGEMENT
DRUM DEHUMIDIFY
RETURN

Konica Minolta bizhub 185 Specifications

General

Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Copy Speed	18 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Printing Technology	Laser
First Print Out Time	8 seconds
First Copy Out Time	8 seconds
Paper Output Capacity	100 sheets
Memory	32 MB
Type	Monochrome
Max Paper Size	A3
Duplex Printing	Manual
Network Connectivity	No
Zoom Range	50% to 200%
Paper Size	A5 to A3