bizhub 185 5-5
5.2 Basic settings
5
5.2 Basic settings
Configure the basic settings for making copies.
For details on the basic copy operations, refer to page 3-7.
0 If the [PHOTO] quality setting is selected, the [AUTO] density setting cannot be selected.
0 If the following conditions are met, the other paper tray is automatically selected when a paper tray that
was selected becomes empty while printing copies.
- Load paper of the same size and type to the Tray 1 and Bypass Tray, and ensure the same orientation
of paper.
% Configure settings from the control panel.
No. Name Description
1 Number of copies Specify the number of copies you desire.
2 Paper tray Select the paper tray loaded with the desired paper.
For details on loading paper, refer to page 3-4.
3 Paper size Select the size of the paper loaded in the paper tray.
A3 w, A4 w, A4 v, A5 w, A5 v, B4 w, B5 w, B5 v, FLS w, 8K w,
16K w, 16K v, 11 e 17 w, LGL w, LTR w, LTR v, INV w, INV v,
MEM1 w, MEM2 w
MEM1 and MEM2 are custom sizes.
4 Zoom ratio Set the zoom ratio of the image to be copied.
Fixed zoom Select a preset zoom ratio when copying
from a fixed size original onto a fixed size
paper.
<Centimeter area>:
50%, 70% (A4%A5, A3%A4), 81%
(B4%A4), 100%, 115% (B4%A3), 141%
(A5%A4, A4%A3), 200%
<Inch area>:
50%, 64% (11 e 17%LTR), 78%
(LGR%LTR), 100%, 121% (LGL%11 e 17),
129% (LTR%11 e 17), 200%
Manual zoom The zoom ratio can be set between 50%
and 200% by using the keypad or the +
and , keys.
It can be adjusted in manual zoom after
fixed zoom is selected.
To Next Page
Loading...
Need help?
General
