Konica Minolta bizhub 185 User Manual

bizhub 185 10-5
10.1 Paper
10
Loading paper into the Bypass Tray
0 Make sure that the original and the loaded paper have the same orientation. Otherwise, some parts of
the image may be lost.
1 Slide the Lateral Guides to provide more space between them.
% 1. Paper Take-Up Roller
NOTICE
Be careful not to touch the Paper Take-Up Roller.
2 With the side to be printed on (the side facing up when the package was unwrapped) facing down, in-
sert the paper as far as possible into the feed slot.
% The image will be printed on the surface of the paper facing down.
% Do not load so many sheets of paper that the top of the stack is higher than the , mark.
% If paper is curled, flatten it before loading it.
% Allows you to load up to 100 sheets of plain paper, or 20 sheets of card in the paper tray.
3 Slide the Lateral Guides to fit the size of paper being loaded.
% Push the Lateral Guides firmly up against the edges of the pa-
per.
4 Press the Start key to restart printing.
1

Konica Minolta bizhub 185 Specifications

General

Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Copy Speed	18 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Printing Technology	Laser
First Print Out Time	8 seconds
First Copy Out Time	8 seconds
Paper Output Capacity	100 sheets
Memory	32 MB
Type	Monochrome
Max Paper Size	A3
Duplex Printing	Manual
Network Connectivity	No
Zoom Range	50% to 200%
Paper Size	A5 to A3