501/421/361 6-14
Copy paper/originals
6
Using the keyboard that appears, type in the name of the key, touch [OK], and then touch [Close]. For
details on typing in text, refer to "Entering text" on page 14-2.
7 Touch [OK], and then touch [OK] in the next three screens that appear.
The Basic screen appears again.
6.2.4 Specifying a paper type for bypass tray
If paper other than plain paper, such as OHP transparencies or special paper, is loaded in bypass tray, be
sure to change the paper type setting.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Touch the button for the bypass tray.
– If a setting for special paper is selected the bypass is not selected automatically with the "Auto"
Paper setting.
To Next Page
Loading...
Need help?
General
