501/421/361 7-65
Application functions
7
7.15.5 Printing repeating stamps ("Stamp Repeat" function)
1 Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 2-6.
2 Touch [Application], and then touch [Stamp/Composition].
– To cancel all settings for the Application functions, press the [Reset] key.
The Stamp/Composition screen appears.
3 Touch [Stamp Repeat].
The Stamp Repeat screen appears.
4 Select the desired type of repeating stamp.
– To cancel the Stamp Repeat function, touch [No].
– Touch [Registered Stamp] or [Preset Stamp] to display a screen containing buttons for the available
stamps. Touch the button for the desired stamp, and then touch [OK].
To Next Page
Loading...
Need help?
General
