Specifying Settings From the Control Panel
3
bizhub 750/600 3-121
Specifying Settings From the Control Panel Chapter 3
3.31 Action for Invalid Certificate
When this machine is to be connected to an SSL server as a client, you can
specify the operation method when the validation of the SSL server certifi-
cate has expired.
2
Note
The functions that can be specified are described below.
SMTP over SSL
POP over SSL
LDAP over SSL
To specify the Action for Invalid Certificate settings
1 In the Administrator Setting screen, touch [5 Network Setting].
2 In the Network Setting screen, touch [0 Detail Setting].
3 In the Detail Setting screen, touch [9 Action for Invalid Certificate].
The Action for Invalid Certificate screen appears.
4 Select the job process method when disabled.
5 Touch [OK].
Item Description
Continue The job continues even when the validation of a server cer-
tification has expired.
Delete the Job The job is deleted when the validation of a server certifica-
tion has expired.
To Next Page
Loading...
Need help?
General
