Konica Minolta bizhub C451 Copy Operations

bizhub C451/C550/C650 4-81
Basic copy operations
4
4.14 Manually using the finisher
If the post inserter is installed onto the finisher, the finisher can be operated manually by using the control
panel of the post inserter.
The following Finishing settings are available with each of the option configurations.
Finisher FS-517 and post inserter
- "Corner Staple", "2 Position" Staple
Finisher FS-608 and post inserter
- "Corner" Staple, "2 Position" Staple
- Center Staple & Fold
- Tri-Fold
Finisher FS-517, post inserter and punch kit
- "Corner" Staple, "2 Position" Staple
- Punch settings
Finisher FS-608, post inserter and punch kit
- "Corner" Staple, "2 Position" Staple
- Center Staple & Fold
- Tri-Fold
- Punch settings
2
Reminder
Only load paper into the lower tray. Do not use the upper tray.
Corner Staple 2 Position
Staple
Center Staple
& Fold
Tri-Fold Punch
Paper weight Paper size Number of sets Output
tray
"Corner" Staple,
"2 Position" Staple
Plain paper (64 to
90 g/m
2
)
Thick paper 1/1+/2 (91 to
209 g/m
2
)
A3w to A5v,
12-1/4×18w
*
,
11×17w to 5-1/2×8-
1/2w/v, 8×13w,
16Kw/v, 8Kw
Finisher FS-517:
50 sets
Finishing
tray 1
Finisher FS-608:
50 sets (64 to
80 g/m
2
)
16 sets (81 to
90 g/m
2
)
Punch settings Plain paper (64 to
90 g/m
2
)
Thick paper (91 to
128 g/m
2
)
When Punch kit
PK-512 is installed:
A3w to A5v,
11×17w to 5-
1/2×8-1/2w, 8×13w,
16Kw/v, 8Kw
When Punch kit
PK-513 is installed:
A3w, B4w, A4v,
B5v, 11×17w,
8-1/2×11v,
7-1/4×10-1/2v,
16Kv, 8Kw
200 sets Finishing
tray 1

Konica Minolta bizhub C451 Specifications

General

Brand	Konica Minolta
Model	bizhub C451
Category	All in One Printer
Language	English