EasyManuals Logo

Konica Minolta bizhub C554 User Manual

Konica Minolta bizhub C554
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background imageLoading...
Page #198 background image
17
17-14 bizhub C554/C454/C364/C284/C224
[Printer Adjustment]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
Adjust the print start position and defective print images.
[Leading Edge Adjustment]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
- [Leading Edge Adjustment]
Adjust the print start position at the leading edge of the paper relative to the paper discharge direction.
Press Start to print a test pattern. Check the test pattern and adjust so that the margin between the leading
edge of the paper and the print start position is 3/16 inches (4.2 mm). Repeat adjustments, as required.
Settings Description
[Leading Edge Adjustment] Adjust the print start position at the leading edge of the paper relative to
the paper discharge direction.
For details, refer to page 17-14.
[Centering] Adjust the print start position on the left edge of the paper relative to the
paper discharge direction.
For details, refer to page 17-15.
[Leading Edge Adjustment
(Duplex Side 2)]
Adjust the print start position at the leading edge of the back side of the
paper relative to the paper discharge direction for printing the back side in
2-sided printing.
For details, refer to page 17-15.
[Centering (Duplex 2nd
Side)]
Adjust the print start position at the left edge of the paper relative to the
paper discharge direction for printing the back side in 2-sided printing.
For details, refer to page 17-16.
[Erase Leading Edge] Adjust leading edge erase width. For details, contact your service repre-
sentative.
[Vertical Adjustment] Adjust the feed direction zoom ratio of paper types. For details, contact
your service representative.
[Media Adjustment] Adjust print defects (voids, white spots, roughness) that are caused by pa-
per properties for each paper type.
For details, refer to page 17-17.
Settings Description
[Paper Type] Select the type of paper that is used to adjust the start position for printing.
[Adjust Value] Enter an adjustment value between -3.0 and +3.0 mm by tapping [-] and
[+].
[0.0 mm] is specified by default.

Table of Contents

Other manuals for Konica Minolta bizhub C554

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konica Minolta bizhub C554 and is the answer not in the manual?

Konica Minolta bizhub C554 Specifications

General IconGeneral
Print Resolution1200 x 1200 dpi
Scan SpeedUp to 160 opm
CategoryAll in One Printer
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print Speed (Black)55 ppm
Print Speed (Color)55 ppm
Hard Drive250 GB
TypeColor Multifunction Printer
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Print Speed55 ppm (black & color)
Paper CapacityMax 6, 650 sheets
Monthly Duty Cycle300, 000 pages
ConnectivityEthernet, USB
Paper SizeA3 to A5, SRA3, custom sizes
Memory2 GB
Fax Resolution200 x 200 dpi
Display9-inch color touchscreen

Related product manuals