bizhub C554/C454/C364/C284/C224 5-3
5
5 Specifying the Size or Type of the Paper to Be Cop-
ied
Selecting the size and type of paper ([Paper])
This machine selects paper automatically based on the size of the detected original when making a copy. If
necessary, you can specify paper with a type or size different from that of the original to make a copy.
You can also change the size and type of paper loaded in a paper tray.
For details, refer to page 15-5.
Copying on paper of a special size ([Custom Size])
Copy on special size paper using the Bypass Tray. Specify the width and length of the paper. You can assign
name and register the paper size to the memory once it is specified. You can recall the size in the future.
For details, refer to page 15-7.
Copying on a wide paper ([Wide Paper])
You can specify a paper size that is slightly larger than the size of the original as wide paper. If you specify
wide paper to print the original on, the original image is arranged at the center of the page so that no part of
the image is lost.
For details, refer to page 15-8.
Tips
- To specify a wide paper, select the paper size with W (8-1/2 e 11W, etc.) If you select wide paper that
is the same size as an original, the original is copied at 100% magnification.
For example, load paper with 11 e 17 into the paper tray, and set the paper size to 8-1/2 e 11W. If you
select the tray to copy an original with 8-1/2 e 11, the original is copied at 100% magnification.
Changing the paper setting of the paper tray ([Change Tray Settings])
Change the paper type and paper size of the paper tray.
For details, refer to page 15-5.
To Next Page
Loading...
Need help?
General
