To Next Page

To Previous Page

6-10

6.3 If the Specified Paper is not Found

If the specified paper is not loaded into a tray at the time of printing, the message [Please load designated xxx paper

/ To check details, touch [Confirm Details]] is displayed on the screen.

To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded paper

of a different size.

)Replacing with the specified paper

A Press [Confirm Details] on the

[MACHINE] screen.

B Select a tray to replace paper into, then

press [Change Setting].

C Press [Change Setting].

Notations and Symbols Used in this Manual2
Exclusion of Liability3
Impermissible Operating Conditions3
Intended Use3
Target Groups3
Configuration and Usage of this Guide4
Display Resolution5
How to Display the Top Page of the HTML User's Guide5
HTML User's Guide Operating Environment5
In a Macintosh Environment5
In a Windows Environment5
Supported Operating Systems/Browsers5
Conventions Used in this Guide6
- Table of Contents7
- Checking the Mounted Optional Devices7
- Make a Note about this Machine Information7
- Checking Network Information8
- Contents10
- Before Getting Started13
- Power Supply13
- Turning the Power on13
- Turning the Power ON/OFF13
- Turning the Power off14
- Power-Saving Function15
- Available Operations in this Machine17
- Copy Functions17
- Major Functions of this Machine17
- Print Functions17
- Device Control Function (Pagescope Web Connection)18
- Hold Function of Print Jobs Using the HDD18
- Scan Functions18
- Application Functions19
- Color Management Function (Color Centro)19
- Job Management Function (Job Centro)19
- Other Applications19
- Let's Make Prints20
- Printing Flow20
- Step 1: Prepare the Printer Driver and Applications20
- Step 2: Load Paper into a Tray20
- Step 3: Configure Information of the Paper Loaded into a Tray in this Machine21
- Step 4: Use the Printer Driver to Print Data21
- Step 5: Check the Finishing22
- Characteristics of Printer Driver23
- In a Macintosh Environment23
- In a Windows Environment23
- Installing Software23
- Installing the Printer Driver23
- Operating Environment23
- In a Windows Environment24
- Installation24
- Default Setting26
- In a Macintosh Environment27
- Installation27
- Default Setting30
- Color Centro31
- Installing Applications31
- Job Centro31
- Operating Environment31
- Color Centro Setup32
- Function Overview32
- Installation33
- Start34
- Function Overview35
- Job Centro Setup35
- Installation36
- Start37
- Basic Operations38
- Loading Paper38
- Loading Paper in Post Inserter of Folding Unit FD-50339
- Paper Setting40
- Specifying Paper Information for a Tray40
- Printer Driver Functions45
- Printer Driver Setting45
- [Color Mode]: Select an Output Color45
- [Color Mode]: 2-Color Printing46
- [Management]: Color Configuration47
- [Management]: Manual Setting of a Color Conversion48
- Adjustment Flow49
- Both Sides Adjustment49
- Maintaining the Finishing Quality49
- Gap Adjustment50
- Making the both Sides Adjustment for each Tray50
- Chart Adjustment55
- Zoom and Image Shift Adjustment61
- Image Quality Adjustment65
- To Manage the Daily Image Quality65
- To Specify the Reference Image Quality65
- Daily Image Quality Management (Calibration)66
- Calibration Timing67
- Maximum Density Auto Adjustment (RU)69
- Auto Setting of Color Density Control71
- Color Density Control71
- Manual Setting of Color Density Manual Control74
- Executing Calibration Using the Image Controller76
Working Table79
- Specifying the Reference Image Quality82
- Adjusting the Finisher and Saddle Stitcher83
- Opening the Screen to be Adjusted83
- Adjustable Settings84
- Troubleshooting85
- Replenish and Replace Consumables85
- Replacing a Toner Bottle85
- Replacing a Staple Cartridge87
- Replacing a Waste Toner Box89
- Clearing Paper Jams91
- How to View the Animation Guide91
- [JAM Position] Screen91
- Illustration Screen for Jam Handling92
- If the Specified Paper Is Not Found94
- Replacing with the Specified Paper94
- Forcibly Printing Using the Loaded Paper96
- If an Error Has Been Displayed During Scanning97
- HDD Space Insufficiency97
- Hue Adjustment98
- When Calibration Is Executed for Daily Management98
- When Calibration Is Not Executed98
- Image Position Adjustment99
- Appendix100
- Good Use of the HTML User's Guide100
- Let's Master the Search Function100
- Confirm the Setting Required for the Target Finishing in an Operation Example100
- Name of each Component101
- External Components101
- Internal Components103
- Control Panel Layout105
- Convenient Use of Scan Function (Scan to SMB)107
- Step 1: Prepare the Destination Computer107
- In a Windows Environment107
- In a Macintosh Environment109
- Step 2: Connect this Machine to the Network109
- Step 3: Prepare the Operating Environment for SMB Transmission109
- Step 4: Configure Settings According to Your Environment109
- Step 5: Send Scan Data to a Public Folder110
- Major Specifications111
- Machine111
- Feeding-Related Optional Devices111
Paper Feeder Unit PF-708112
- Post Inserter (Folding Unit FD-503)113
Post Inserter PI-502114
- Output-Related Optional Devices115
Relay Unit RU-510116
Large Capacity Stacker LS-506118
Perfect Binder PB-503120
Finisher FS-532121
Multi Puncher GP-501124
- Electronic Optional Devices125
Auto Ring Binder GP-502125
- Original-Related Optional Devices126
- Reverse Automatic Document Feeder (ADF)126
Image Controller IC-310126
- Weight for each Size127
- Maximum Paper Size and Printing Area128

Brand	Konica Minolta
Model	bizhub PRESS C1100
Category	All in One Printer
Language	English

Konica Minolta bizhub PRESS C1100 User Manual

Table of Contents

Other manuals for Konica Minolta bizhub PRESS C1100

Questions and Answers:

Konica Minolta bizhub PRESS C1100 Specifications

Related product manuals