10
Color Adjustment
10-38 bizhub PRO C6500
10.9 Selecting Screen Type or Compression
This machine provides two methods to reproduce the print image; Line
Screen and Dot Screen.
The machine selects an appropriate method automatically according to the
other copy conditions selected for the job.
!
Detail
See "Reproducing Images" on page 10-9 for details of Line Screen and
Dot Screen.
Follow the procedure below to select the reproducing method manually.
Dot Screen and Line Screen
Select one of the following four types of screen according to the original type
and desired print result.
- Dot 1: Dot Screen
- Dot 2: Dot Screen
- Line 1: Line Screen
- Line 2: Line Screen
The print result may not be satisfactory depending on the original type. In this
case, try another screen type.
!
Detail
Dot 2 and Line 2 also provide the lower line screen (type 2) as an option.
This setting can be made in the Administrator setting. See page 6-62 of
POD Administrator’s reference.
Compression
The desired copy result may not be obtained because the internal memory
overflows when using the reproducing method selected manually or auto-
matically according to the other copy conditions of the job.
In this case, select Compression to give priority to compressing the scanned
data.
The Dither method is used instead of Line Screen or Dot Screen.
Auto
Auto selects an appropriate reproducing method automatically according to
the selected copy conditions.
This mode is initially selected.
C6500USv1.book Page 38 Monday, September 11, 2006 1:51 PM
To Next Page
Loading...
Need help?
General
