Konica Minolta BIZHUB PRO C6500 User Guide

Preparation for Use
2
bizhub PRO C6500 2-27
2.3 Automatically Returning to the Default Settings: Auto
Reset
Pressing [Reset] on the control panel or a certain period of machine inactivity
clears all the copy settings specified so far and restores the machine to the
default settings.
This function is called Auto Reset.
As the factory default, Auto Reset is set to function after 1 minute of machine
inactivity. The timespan for the auto reset operation can be specified in the
Utility mode.
This machine provides two types of default settings; Full-auto and Initial. This
selection can be made also in the Utility mode. Full-auto is initially selected.
!
Detail
For selecting the timespan for the auto reset operation, see page 5-17 of
the POD Administrator’s reference.
For selecting Full-auto or Initial as the default settings, see page 5-40 of
the POD Administrator’s reference.
Copy settings specified as Full-auto
These settings cannot be altered except the Output Application setting.
- Original Setting: Normal
- Color: Full color
- Zoom: 1.000
- Application: None
- Quality Adjustment: Standard
- Output Application: Selection available in the Utility mode
- Simplex/Duplex: 1->1
- Paper Setting: Auto
!
Detail
To change the selection of Output Application for Full-auto, see page 5-
40 of the POD Administrator’s reference.
bizhub_C6500_02.fm Page 27 Monday, September 11, 2006 2:56 PM

Konica Minolta BIZHUB PRO C6500 Specifications

General

Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Scanner Type	Color Scanner
Scanner Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Print Speed	65 ppm (color and B&W)
Resolution	1200 x 1200 dpi
Connectivity	Ethernet, USB
Operating System Compatibility	Mac
Color Capability	Full color
Copy Speed	65 ppm (color and B&W)