Konica Minolta BIZHUB PRO C6500 User Guide

Output Applications
12
bizhub PRO C6500 12-51
12.9 Using Finisher FS-607 Manually
The Finisher FS-607 with Paper inserter PI-502 installed can be operated
manually, using the operation panel provided on the paper inserter.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are de-
scribed below.
- Finisher FS-607 + Paper inserter PI-502
– Staple (1 staple / 2 staples)
– Fold & Staple
– Multi Tri-Fold
- Finisher FS-607 + Paper inserter PI-502 + Punch kit PK-512
– Staple (1 staple / 2 staples)
– Fold & Staple
– Multi Tri-Fold
– Punch
Prerequisites
0 Paper should be placed only in the lower tray of the paper inserter. Upper
tray cannot be used.
0 Staple (1 staple / 2 staples) and Punch can be used in combination.
Start/Stop button
Fold&Staple
1 oblique staple
2 parallel staples
Multi Tri-Fold Punch
C6500USv1.book Page 51 Monday, September 11, 2006 1:51 PM

Konica Minolta BIZHUB PRO C6500 Specifications

General

Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Scanner Type	Color Scanner
Scanner Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Print Speed	65 ppm (color and B&W)
Resolution	1200 x 1200 dpi
Connectivity	Ethernet, USB
Operating System Compatibility	Mac
Color Capability	Full color
Copy Speed	65 ppm (color and B&W)