Konica Minolta CR-400 User Manual

33
Measuring Head 1
Preparation
<Color Space and Color Difference Setting>
Setting conditions of color space and symbol/color difference target color/color difference tolerance
types are shown as follows.
There are restrictions in the following table depending on selected color space.
• In Chapter 1 Measuring Head 1, only in the table function.
• In Chapter 2 Measuring Head 2, all displays except for User index in the table function.
(O: Valid, X: Invalid)
*1: Input color difference tolerance at ∆L*, ∆a*, and ∆b*
*2: Input color difference tolerance at ∆L99, ∆a99, and ∆b99
*3: Input at XYZ color space
*4: The registration by only PC is available.

Konica Minolta CR-400 Specifications