105
AUTO POWER OFF - DATA-TRANSFER MODE
If the camera does not receive a read or write command within ten minutes, it will shut
down to save power. When the camera shuts down, an unsafe-removal-of-device
warning may appear on the computer monitor. Click “OK.” Neither the camera or
computer will be damaged in this operation. Unplug the USB cable and turn off the
camera. Remake the USB connection by reattaching the cable and turning the camera
on.
QUICKTIME 6 SYSTEM REQUIREMENTS
To install QuickTime, follow the instructions
in the installer. The latest version of
QuickTime can be downloaded free of
charge from the Apple Computer web site:
http://www.apple.com/.
IBM PC/AT Compatible
A Pentium processor-based PC or
compatible computer
Windows
®
98, 98SE, Me,
2000 Professional, and
XP (Home/Professional)
At least 128MB of RAM
To Next Page
Loading...
