122 APPENDIX
The section covers minor problems with basic camera operation. For major problems or
damage, or if a problem continues to reoccur frequently, contact our service facility.
APPENDIX
Troubleshooting
Problem Symptom Cause Solution
The camera
will not work.
Nothing dis-
played on the
monitor.
The battery is dead. Replace battery (p. 14).
The auto-power-off func-
tion has turned the cam-
era off.
Press the main switch to restore
power. The length of the auto-
power-off period can be
changed in section 1 of the
setup menu.
The AC adapter set is not
connected properly.
Check that the AC adapter set is
connected to the camera and a
live electrical outlet (p. 17, 18).
Shutter will
not release.
“0000” is dis-
played on the
frame counter.
No-card warn-
ing appears
on the moni-
tors.
Memory card is full and
unable to store an image
at the image-quality or
image-size setting on the
camera.
Insert a new memory card (p.
20), delete some images (p. 37),
or change the image-quality or
image-size setting (p. 48).
No memory card in the
camera.
Insert a memory card (p. 20).
Card-locked
warning
appears on
the monitor.
Memory card is locked.
Unlock the memory card using
the write-protect switch (p. 21).
To Next Page
Loading...
