RECORDINGMODEDISPLAY
The recording display shows information on
camera operation in panels. The information
displayed varies with the functions set.
As the camera is rotated to a vertical
position, the display automatically rotates to
compensate for the camera position.
1. Exposure mode / exposure panel
2. Flash panel
3. Ev scale
Color mode / Digital Effects Control / Metering / AF
area / AF mode / Release priority / Drive mode panel
5. AE lock / battery condition panel
6. Camera-sensitivity / Zone Matching panel
7. Image size / quality panel
8. White-balance panel
9. Frame counter
Camera Notes
VlEWFINDER
C
F
I
L
C
J
= - Wide focus frame
tJ
Spot AF area (p. 47)
\J
:......J
'1
Local focus areas (p. 57)
\--J j
....../
='_'- Spot-metering area (p. 59)
LJ ,.......j
The spot AF area and local focus areas are illuminated briefly to indicate the point of focus when
the focus is locked.
1. Flash-compensation indicator (p. 60)
2. Flash signal (p. 31)
3. High-speed sync. indicator (p. 112)
4. Wireless/Remote flash indicator (p. 76)
5. AE lock indicator (p. 46)
6. Focus signal (p. 29)
7. Shutter-speed display
8. Aperture display
9. Ev scale
10. Frames-remaining counter
11. Camera-shake warning (p. 30)
12. Anti-Shake scale (p. 32)
The frames-remaining counter indicate the approximate number of frames that can be stored in the
camera buffer memory while recording. This number changes as images are captured and saved to
the memory card.
To Next Page
Loading...
Need help?
General
