Konica Minolta Revio KD310Z - Make so the Image Information is not displayed; Setting the Operation Sounds

89
Using the Set-up Menu (Cont’d)
Make so the Image Information is not displayed
- You can set the camera to not display information (p.36, 60) during shooting
or play back.
- The default setting is “ON” (display).
1. Select “INFO DISP” and press 왘.
Select “OFF” by pressing 왔 or 왖, and press
왘 or the MENU/SET button. The setting is
completed and the screen will return to the
set-up menu.
• If you press 왗, the setting is invalidated and you
return to the set-up menu.
1
Setting the Operation Sounds
- You can turn on and off the beeps (sounds made for each type of operation
and warnings).
- The default setting is turned “ON” (set to sound).
1. Select “SOUND”, press 왘 and the settings
screen appears.
Using 왔 or 왖, select “OFF” or “ON” and
press either 왘 or the MENU/SET button.
The setting is completed and you return to
the set-up menu.
• If you press 왗, the setting is invalidated and you
return to the set-up menu.
1